GPS Watch tracker

GPS Watch tracker self-checking function Real-time monitoring function E-fence management SOS Emergency features

GPS Watch tracker

self-checking functionReal-time monitoring functionE-fence managementSOS Emergency features

3.1 self-checking function

3.2 Real-time monitoring function

3.3 E-fence management

3.4 Emergency features

3.5 Voice Monitor Function

3.6 Dead zone compensation

3.7 Low-voltage warning function

3.8 Open and close the e-fence function

3.9 Modify the Center Address Online Function

3.10 Emergency call set-up function

3.11 Center number set-up function

3.12 Point query function

3.13 Communications Data Encryption

3.14 Two-center model

3.15 Dual-channel transmission

B. TELECOMMUNICATION TRANSMISSION AGREEMENT

C. AGREEMENT FORMAT OF UPSTREAM AND DOWNLINK

SIZE:60mm×46mm×17mm

Details: III. LOCATOR FUNCTIONAL REQUIREMENT Locator functional requirements should have the following basic features:3.1 self-checking function Locator will test itself when the device work in the power, and self-test results reported to the backstage management system. 3.2 Real-time monitoring functionLocator can send real-time location information according to pre-established time interval to the back office systems; the content including time, longitude, latitude, direction, status. The minimum time interval can be set as: 30 seconds, maximum interval time: 30 minutes. 3.3 E-fence managementBackground management system can be pre-positioning 4 electronic fences (rectangular area) in the internal storage , when the moving target leave the electronic fence, the positioning system will alarm to management back-system initiatively. 3.4 Emergency featuresIf the moving target is in an emergency situation, press the locator button on the emergency, the positioning system will automatically dial one of four pre-stored relatives’ contact telephone numbers, and emergency information will be sent to the background management system. 3.5 Voice Monitor FunctionIf the moving target is in an emergency situation, press the locator button on the emergency, the positioning system will open on-site voice monitoring function automatically, which can clearly hear a moving target on-site voice in the background management system. 3.6 Dead zone compensationwhen the locater is in no GPRS signal area and location information can not be uploaded, locator will upload and save the information in accordance with a pre-mined interval of time. When the locator leaves the blind, it will upload the information accordance with x seconds in first time. 3.7 Low-voltage warning functionLocators’ voltage drops below threshold, the positioning system will take the initiative to report the low-voltage warning message to the backstage management system, while positioning system voice prompts, such as: power is not enough, please charge! 3.8 Open and close the e-fence functionBackground management system can be configured to open and close locator’s electronic fence function. 3.9 Modify the Center Address Online FunctionAdmin modify the system through the wireless center locator address (IP and port), the parameter is set to restart after the positioning device, to take effect. 3.10 Emergency call set-up functionIt can set up emergency call inside the locator by wireless mode; the number of calls is to four. When a moving target is in an emergency situation, these telephone numbers are used for contacting. 3.11 Center number set-up functionIt can set up a center number for locator by wireless mode, (i.e., SIM card number), after the success, the locator can only accept and response the control instructions from this number. 3.12 Point query functionLocator can accept the location request from emergency calls (4), received location query request, the positioning system will set its own current (or last time valid location) messages to the other phone. 3.13 Communications Data EncryptionThe communication of locator and system data transmit in accordance of the provisions encryption. 3.14 Two-center modelLocator support two-center connection mode, which is pre-storing the two centers address in one locator. 3.15 Dual-channel transmissionLocator supports dual-channel transmission, in the default state, the upstream information dual-channel upload to central severs in GPS means. Downlink information (all kinds of set-instructions) can be sent through GPRS mode, and can also be sent to locator via SMS mode. IV. TELECOMMUNICATION TRANSMISSION AGREEMENTV. AGREEMENT FORMAT OF UPSTREAM AND DOWNLINK

GPS Watch tracker